姓名：易艳良

性别：男

邮箱：y_yanliang   AT 163 .com

研究方向：

新型耐磨蚀材料、金属基复合材料、材料制备与加工、材料力学行为分析

职称及职务：副教授

参与科技项目：

1.国家自然基金，Fe-Cr-Ni-B合金液-固两相流作用下的冲刷腐蚀交互作用基础研究，（No. 51705414）；

2.国家自然基金，铸造高硼高速钢硼碳化物调控及其耐磨性研究，(No. 51475005)；

3.国家自然基金，高强度钢多层次组织与塑韧性耦合关系研究，(No.51461006)；

4.国家自然基金，高强度钢旋转磨损加轴向疲劳载荷下的协同疲劳行为，(No.51671060)；

代表性论文：

1.Yi YL, Xing JD, Lu YF, et al. Effect of normal load on two-body abrasive wear of an Fe-B-Cr-C based alloy with minor Cu and Ni additions[J]. Wear, 2018, 408-409:160-170

2. Yi YL, Xing JD, Wan MJ, et al. Effect of Cu on microstructure, crystallography and mechanical properties in Fe-B-C-Cu alloys[J]. Materials Science & Engineering A, 2017, 708:274-284

3.Yi YL, Li Q, Xing JD, et al. Effects of cooling rate on microstructure, mechanical properties, and residual stress of Fe-2.1B (wt%) alloy[J]. Materials Science & Engineering A, 2019, 754:129-139

4.Yi YL, Xing JD, Yu LL, et al. Effect of casting thickness on microstructure, mechanical properties and abrasion resistance of Fe-B cast alloy[J]. Tribology International, 2018, 122:179-188

5.Yi YL, Xing JD, Ren XY, et al. Investigation on abrasive wear behavior of FeeB alloys containing various molybdenum contentsalloy[J]. Tribology International, 2019, 135: 237-245

6.Yi YL, Xing JD, Lu YF, et al. Investigations on microstructure, mechanical properties and abrasion resistance of 4wt%Cr-2wt%Mn-2wt%Cu-Fe-B alloy[J]. Materials Characterization, 2018, 137:222-230

7.Yi YL, Xing JD, Lu YF, et al. The metastable bcc-Cu precipitation behavior and its effect on microstructure and strengthening of as-cast Fe-B alloy containing 3wt% copper content[J].Material research express, 2019, 6: 1-12

8.Yi YL, Xing JD, Lu YF, et al. Effect of matrix microstructure and sliding distance on abrasive wear resistance of Fe-2wt% alloy. Tribology transaction, 2019，7.

9.Yi YL, Liang YL, Tan QB. Bainite isothermal transformation of Si–Mn–Mo alloy by phase structure factor calculation under different rare earth contents[J].Rare Met.2014;33(4):427-432. 

10.Ren XY, Xing JD, Yi YL*, et al. Effect of solidification rate on microstructure and toughness of Ca-Ti modified high boron high speed steel[J]. Materials Science & Engineering A, 742 (2019) 617-627.

11.Liang YL, Yi YL, Long SL, et al.Effect of Rare Earth Elements on Isothermal Transformation Kinetics in Si-Mn-Mo Bainite Steels. J. Mater. Eng. Perform. 2014,8.

12.易艳良，梁益龙*, 龙绍檑.空冷条件下稀土对GDL-1钢连续转变的影响[J].材料热处理学报，2014，12

13.梁益龙，易艳良，汪航.磨损加疲劳载荷下的协同疲劳行为[J].摩擦学学报，2015,35(1).

专利：

1.邢建东,易艳良,符寒光等. 一种高淬透性高硼铸钢及其制备方法, 201810142386.8

2.梁益龙,易艳良,等. 改善CL60钢车轮踏面组织和力学性能的热处理工艺, CN103255283A. 2013.